Molecular Crystals Research Articles

Van der Waals Epitaxially Grown Molecular Crystal Dielectric Sb2O3 for 2D Electronics.

Two-dimensional (2D) semiconducting materials have attracted significant interest as promising candidates for channel materials owing to their high mobility and gate tunability at atomic-layer thickness. However, the development of 2D electronics is impeded due to the difficulty in formation of high-quality dielectrics with a clean and nondestructive interface. Here, we report the direct van der Waals epitaxial growth of a molecular crystal dielectric, Sb2O3, on 2D materials by physical vapor deposition. The grown Sb2O3 nanosheets showed epitaxial relations of 0 and 180° with the 2D template, maintaining high crystallinity and an ultrasharp vdW interface with the 2D materials. As a result, the Sb2O3 nanosheets exhibited a high breakdown field of 18.6 MV/cm for 2L Sb2O3 with a thickness of 1.3 nm and a very low leakage current of 2.47 × 10-7 A/cm2 for 3L Sb2O3 with a thickness of 1.96 nm. We also observed two types of grain boundaries (GBs) with misorientation angles of 0 and 60°. The 0°-GB with a well-stitched boundary showed higher electrical and thermal stabilities than those of the 60°-GB with a disordered boundary. Our work demonstrates a method to epitaxially grow molecular crystal dielectrics on 2D materials without causing any damage, a requirement for high-performance 2D electronics.

Polarization‐directed nanophotonic routers based on two‐dimensional inorganic molecular crystals

AbstractPhotonic and plasmonic hybrid nanostructures are the key solution for integrated nanophotonic circuits with ultracompact size but relative low loss. However, the poor tunability and modulability of conventional waveguides makes them cumbersome for optical multiplexing. Here we make use of two‐dimensional molecular crystal, α‐Sb2O3 as a dielectric waveguide via total internal reflection, which shows polarization‐sensitive modulation of the propagating beams due to its large polarization mode dispersion. Both experiments and simulations are performed to verify such concept. These Sb2O3 nanoflakes can be coupled with plasmonic nanowires to form nanophotonic beam splitters and routers which can be easily modulated by changing the polarization of the incidence. It thus provides a robust, exploitable and tunable platform for on‐chip nanophotonics.image

Solution-Processed Monolayer Molecular Crystals: From Precise Preparation to Advanced Applications

Solution-Processed Monolayer Molecular Crystals: From Precise Preparation to Advanced Applications

Flower-shaped 2D crystals grown in curved fluid vesicle membranes

The morphologies of two-dimensional (2D) crystals, nucleated, grown, and integrated within 2D elastic fluids, for instance in giant vesicle membranes, are dictated by an interplay of mechanics, permeability, and thermal contraction. Mitigation of solid strain drives the formation of crystals with vanishing Gaussian curvature (i.e., developable domain shapes) and, correspondingly, enhanced Gaussian curvature in the surrounding 2D fluid. However, upon cooling to grow the crystals, large vesicles sustain greater inflation and tension because their small area-to-volume ratio slows water permeation. As a result, more elaborate shapes, for instance, flowers with bendable but inextensible petals, form on large vesicles despite their more gradual curvature, while small vesicles harbor compact planar crystals. This size dependence runs counter to the known cumulative growth of strain energy of 2D colloidal crystals on rigid spherical templates. This interplay of intra-membrane mechanics and processing points to the scalable production of flexible molecular crystals of controllable complex shape.

A Thermosalient and Mechanically Compliant Organic Crystalline Optical Waveguide Switcher

The dense and ordered molecular arrangements endow dynamic molecular crystals with fast response, rapid energy conversion, low energy dissipation, and strong coupling between heat/light and mechanical energy. Most of the known dynamic crystals can only respond to a single stimulus, and materials that can respond to multiple stimuli are rare. Here, we report an organic crystalline material that can be bent plastically and is also thermosalient, as its crystals can move when they undergo a reversible phase transition. The crystals transmit light regardless of their shape or crystalline phase. The combination of light transduction and reversible thermomechanical deformation provides an opportunity to switch the waveguiding capability of the material in a narrow temperature range, which holds a tremendous potential for applications in heat‐averse electronic components, such as central processing units. Unlike existing electronics, the material we report here is completely organic and therefore much lighter, potentially reducing the overall weight of electronic circuits.

Hydrogen bonds and elastic anisotropy of nitrile molecular crystals: an investigation from first-principles

ABSTRACT Atomistic calculations based on semi-classical dispersion-corrected density functional theory were performed to investigate bonding and elastic properties of low temperature polymorphs of three nitrile molecular crystals. For that purpose, the DFT-PBE-D3ijk method, which account for both pair and three-body interactions, was applied. The analysis of Hirshfeld surfaces demonstrated that the (C-N…H) hydrogen bonds are the strongest and the dominant ones in the three nitrile molecular crystals. The latter were found to share a common structural feature, consisting of an antiparallel orientation of the terminal nitrile groups at their constituent molecules. Our prediction of the elastic properties demonstrated that malonitrile has the highest Young modulus and succinonitrile has the lower one. The three nitrile crystals are expected to have similar resistance to volume variation while succinonitrle is predicted to exhibit the lowest resistance to shape change. Otherwise, succinonitrile was found to be ductile while malononitrile and acetonitrile were shown to be brittle. Elasticity anisotropy analysis demonstrated that the directions of maximum Young’s modulus are always nearly parallel to the direction of alignment of strong (C-H…N) hydrogen bonds in the three nitrile crystals. The present analyses are relevant for understanding the structure and the properties of more complex high temperature phases.

A Thermosalient and Mechanically Compliant Organic Crystalline Optical Waveguide Switcher.

The dense and ordered molecular arrangements endow dynamic molecular crystals with fast response, rapid energy conversion, low energy dissipation, and strong coupling between heat/light and mechanical energy. Most of the known dynamic crystals can only respond to a single stimulus, and materials that can respond to multiple stimuli are rare. Here, we report an organic crystalline material that can be bent plastically and is also thermosalient, as its crystals can move when they undergo a reversible phase transition. The crystals transmit light regardless of their shape or crystalline phase. The combination of light transduction and reversible thermomechanical deformation provides an opportunity to switch the waveguiding capability of the material in a narrow temperature range, which holds a tremendous potential for applications in heat-averse electronic components, such as central processing units. Unlike existing electronics, the material we report here is completely organic and therefore much lighter, potentially reducing the overall weight of electronic circuits.

Molecularly Thin 2D Organic Single Crystals: A New Platform for High-Performance Polarization-Sensitive Phototransistors.

The inherent linear dichroism (LD), high absorption, and solution processability of organic semiconductors hold immense potential to revolutionize polarized light detection. However, the disordered molecular packing inherent to polycrystalline thin films obscures their intrinsic diattenuation, resulting in diminished polarization sensitivity. In this study, we develop filter-free organic polarization-sensitive phototransistors (PSPs) with both a high linear dichroic ratio (LDR) and exceptional photosensitivity utilizing molecularly thin dithieno[3,2-b:2',3'-d]thiophene derivatives (DTT-8) two-dimensional molecular crystals (2DMCs) as the active layer. The orderly molecular packing in 2DMCs amplifies the inherent LD, and their molecular-scale thickness enables complete channel depletion, significantly reducing the dark current. As a result, PSPs with an impressive LDR of 3.15 and a photosensitivity reaching 3.02 × 106 are obtained. These findings present a practical demonstration of using the polarization angle as an encryption key in optical communication, showcasing the potential of 2DMCs as a viable and promising category of semiconductors for filter-free, polarization-sensitive photodetectors.

Global machine learning potentials for molecular crystals.

Molecular crystals are difficult to model with accurate first-principles methods due to large unit cells. On the other hand, accurate modeling is required as polymorphs often differ by only 1kJ/mol. Machine learning interatomic potentials promise to provide accuracy of the baseline first-principles methods with a cost lower by orders of magnitude. Using the existing databases of the density functional theory calculations for molecular crystals and molecules, we train global machine learning interatomic potentials, usable for any molecular crystal. We test the performance of the potentials on experimental benchmarks and show that they perform better than classical force fields and, in some cases, are comparable to the density functional theory calculations.

Synthesis, crystallographic structure, Hirshfeld surface analysis and DFT calculations of Schiff base (Z)-4-methyl-2-(((3-nitrophenyl)imino)methyl)phenol

The (Z)-4-methyl-2-(((3-nitrophenyl)imino)methyl)phenol (C15H14N2O3) (MNIMP) was prepared by condensation of 2-hydroxy-5-methyl-benzaldehyde and 2-methyl-4-nitro-phenylamine in ethanol and characterized by NMR (1H and 13C), IR and UV–Visible spectroscopy. The molecular crystal packing has been quantitatively explored via Hirshfeld surface analysis, where the intramolecular C−H⋯O bonding represents the principle contribution that stabilizes the crystal packing, with an overall 27.5 % for O⋯H interactions. The outcomes of a theoretical investigation conducted at the B3LYP/6–311++G(d,p) level using the DFT approach are in strong agreement with the results of the experiment. The experimental outcome is compatible with the optimized structure. Z)-4-methyl-2-(((3-nitrophenyl)imino)methyl)phenol vibrational spectrum is calculated at the same theoretical level (DFT/ B3LYP/6–311++G(d,p)), and it is discovered that the theoretically estimated vibrational frequencies and assignments accord well with experimental FT-IR values.

Gas Release as an Efficient Strategy to Tune Mechanical Properties and Thermoresponsiveness of Dynamic Molecular Crystals.

Dynamic molecular crystals combining multiple and finely tunable functionalities are attracting and an increasing attention due to their potential applications in a broad range of fields as efficient energy transducers and stimuli-responsive materials. In this context, a multicomponent organic salt, piperazinium trifluoroacetate (PZTFA), endowed with an unusual multidimensional responsive landscape is reported. Crystals of the salt undergo smooth plastic deformation under mechanical stress and thermo-induced jumping. Furthermore, via controlled crystal bending and release of trifluoroacetic acid from the lattice, which is anticipated from the design of the material, both the mechanical response and the thermoresponsive behavior are efficiently tuned while partially preserving the crystallinity of the system. In particular, mechanical deformation hampers guest release and hence the macroscopic jumping effect, while trifluoroacetic acid release stiffens the crystals. These complex adaptive responses establish a new crystal engineering strategy to gain further control over dynamic organic crystals.

Binary Mixtures of Meloxicam and L-Tartaric Acid for Oral Bioavailability Modulation of Pharmaceutical Dosage Forms.

Binary mixtures of active pharmaceutical ingredients (API) are researched to improve the oral bioavailability of pharmaceutical dosage forms. The purpose of this study was to obtain mixtures of meloxicam and L-tartaric acid because tartaric acid improves intestinal absorption and meloxicam is more soluble in a weakly basic environment. The mixtures in the 0-1 molar fraction range, obtained from solvent-assisted mechanosynthesis, were investigated by differential scanning calorimetry (DSC), Fourier Transform Infrared (FTIR) spectroscopy, Fourier Transform Raman spectroscopy (FT-Raman), X-ray powder diffraction (XRD) and solubility tests. The physicochemical characteristics of the compounds obtained from DSC data reveal, for the first time, the formation of a co-crystal at meloxicam molar fraction of 0.5. FTIR spectroscopy data show the existence of hydrogen bonds between the co-crystal components meloxicam and L-tartaric acid. FT-Raman spectroscopy was used complementary with FT-IR spectroscopy to analyze the pure APIs and their mixtures, to emphasize the appearance/disappearance and the shifts of the position/intensity of vibrational bands, following the formation of hydrogen-bonded structures or van der Waals interactions, and to especially monitor the crystal lattice vibrations below 400 cm-1. The experimental results obtained by X-ray powder diffraction confirmed the formation of the co-crystal by the loss and, respectively, the apparition of peaks from the single components in the co-crystal diffractogram. The solubility tests showed that the co-crystal product has a lower aqueous solubility due to the acidic character of the other component, tartaric acid. However, when the solubility tests were performed in buffer solution of pH 7.4, the solubility of meloxicam from the co-crystal mixture was increased by 57% compared to that of pure meloxicam. In conclusion, the studied API mixtures may be considered potential biomaterials for improved drug release molecular solids.

Small Ionic Liquid‐based Molecule Drives Strong Adhesives

Nature has inspired scientists to fabricate adhesive materials for applications in many burgeoning areas. However, it is still a significant challenge to develop small‐molecule adhesives with high‐strength, low‐temperature and recyclable properties, although these merits are of great interest in various aspects. Herein, we report a series of strong adhesives based on low‐molecular‐weight molecular solids driven by the terminal modification of ionic liquids (ILs) and subsequent supramolecular self‐assembly. The emergence of high strength and liquid‐to‐solid transitions for these supramolecular aggregates relies on modifying IL with a high melting point motif and enriching the types of noncovalent interactions in the original ILs. Using this strategy, we demonstrate that our IL‐based molecular solids can efficiently obtain a high adhesion strength (up to 8.95 MPa). Importantly, we elucidate the mechanism underlying the reversible and strong adhesion enabled by monomer‐to‐polymer transitions. These fundamental findings provide guidance for the design of high‐performance supramolecular adhesive materials..

Small Ionic Liquid-based Molecule Drives Strong Adhesives.

Nature has inspired scientists to fabricate adhesive materials for applications in many burgeoning areas. However, it is still a significant challenge to develop small-molecule adhesives with high-strength, low-temperature and recyclable properties, although these merits are of great interest in various aspects. Herein, we report a series of strong adhesives based on low-molecular-weight molecular solids driven by the terminal modification of ionic liquids (ILs) and subsequent supramolecular self-assembly. The emergence of high strength and liquid-to-solid transitions for these supramolecular aggregates relies on modifying IL with a high melting point motif and enriching the types of noncovalent interactions in the original ILs. Using this strategy, we demonstrate that our IL-based molecular solids can efficiently obtain a high adhesion strength (up to 8.95 MPa). Importantly, we elucidate the mechanism underlying the reversible and strong adhesion enabled by monomer-to-polymer transitions. These fundamental findings provide guidance for the design of high-performance supramolecular adhesive materials..

Benzoyl Valine Quasiracemates: Pairing CF3 Quasienantiomers with H to t-Butyl.

Understanding the interplay of structural features responsible for molecular assembly is essential for molecular crystal engineering. When assembling molecules with encoded motifs, first choice supramolecular strategies almost always include robust directional nonbonded contacts. Quasiracemic materials, considered near racemates since cocrystallization occurs with chemically unique components, lack a molecular framework or functional group restrictions, highlighting the importance of molecular shape to molecular assembly. Recently, our group reported quasiracemates derived from benzoyl leucine/phenylalanine derivatives with two points of chemical difference. In this study, we modified the chemical framework with valine and increased the scope of the work by imposing a larger variance in the side chain substituents. Pairing a CF3 component with quasienantiomers that differ iteratively from hydrogen to t-butyl offers an important view into the supramolecular landscape of these materials. Single-crystal X-ray crystallography and lattice energy assessments, coupled with conformational and crystal structure similarity searches, show an elevated degree of isomorphism for many of the targeted 17 racemates and quasiracemates. These benzoyl amino acid molecular architectures create extended hydrogen-bond patterns in the crystal that provide enhanced opportunities to study the shape space and molecular recognition profiles for a diverse family of quasienantiomeric components.

Are Elastic Properties of Molecular Crystals within Reach of Density Functional Theory? Accuracy, Robustness, and Reproducibility of Current Approaches

Are Elastic Properties of Molecular Crystals within Reach of Density Functional Theory? Accuracy, Robustness, and Reproducibility of Current Approaches

Emergence of Two-Dimensional Inorganic Molecular Crystals

Emergence of Two-Dimensional Inorganic Molecular Crystals

Layer topology of smectic grain boundaries

ABSTRACT Grain boundaries in extremely confined colloidal smectics possess a topological fine structure with coexisting nematic and tetratic symmetry of the director field. An alternative way to approach the problem of smectic topology is via the layer structure, which is typically more accessible in experiments on molecular liquid crystals. Here, we consider exemplary density functional theory results for two-dimensional hard rods to illustrate how the concept of endpoint defects, which appear as tetratic disclinations of quarter charge in director topology, translates to smectic layer topology built around the networks formed by density maxima and minima. By doing so, we elaborate on further advantages of a topological concept evolving around the layer structure rather than the director field, such as providing insight in the structure of edge dislocations or virtual defects at the confining walls.

Surface Engineering of the Mechanical Properties of Molecular Crystals via an Atomistic Model for Computing the Facet Stress Response of Solids.

Dynamic molecular crystals are an emerging class of crystalline materials that can respond to mechanical stress by dissipating internal strain in a number of ways. Given the serendipitous nature of the discovery of such crystals, progress in the field requires advances in computational methods for the accurate and high-throughput computation of the nanomechanical properties of crystals on specific facets which are exposed to mechanical stress. Here, we develop and apply a new atomistic model for computing the surface elastic moduli of crystals on any set of facets of interest using dispersion-corrected density functional theory (DFT-D) methods. The model was benchmarked against a total of 24 reported nanoindentation measurements from a diverse set of molecular crystals and was found to be generally reliable. Using only the experimental crystal structure of the dietary supplement, L-Aspartic acid, the model was subsequently applied under blind test conditions, to correctly predict the growth morphology, facet and nanomechanical properties of L-Aspartic acid to within the accuracy of the measured elastic stiffness of the crystal, 24.53 ± 0.56 GPa. This work paves the way for the computational design and experimental realization of other functional molecular crystals with tailor-made mechanical properties.

A Hybrid Organic‐Crystal‐Based Curved Waveguide Network for Producing, Splitting, and Transducing Multi‐Color Outputs

AbstractHybrid optical components and circuits that deal with multiple signal generation and processing are quintessential for neural networking systems. Herein, the study reports the fabrication of one such component, a hybrid directional coupler (HDC) from blue emissive (4,4′‐bis(2,6‐di(1H‐pyrazol‐1‐yl)pyridin‐4‐yl)biphenyl) (BPP) and green emissive (E)‐1‐(((5‐bromopyridin‐2‐yl)imino)methyl)naphthalen‐2‐ol (BPyIN) pseudo‐plastic molecular crystals. Initially, a BPyIN microcrystal optical waveguide (OW1) is shaped into a strained waveguide with five bends using an atomic force microscopy cantilever‐tip aided mechanophotonics approach. Later, a singly bent BPyIN waveguide (OW2) is integrated into one of the bends at the coupling region on a strained waveguide to produce a 2 × 2 monolithic directional coupler (DC). Later, this 2 × 2 DC is extended to a HDC by integrating a blue emissive BPP waveguide (OW3) at another bend on the deformed waveguide. The fabricated HDC can effectively split the incident light into three parts with different split ratios and deliver multi‐color outputs depending on the port receiving the input signal. The spontaneous generation and processing of various signals produced in the circuit helps in understanding the functioning of complex optical neural networks. The demonstration of such innovative optical components manifests their utility for diverse applications in neural networking and quantum computing systems.